More than five decades ago, civil engineers in northern Illinois carried out a major engineering experiment by using 246,000 cubic yards of coal fly ash beneath 7,500 feet of a major expressway embankment. The pioneering project, completed in 1972 near Waukegan along the US Route 41 corridor, was one of the earliest large-scale examples of recycling industrial waste for American highway construction. Long-term monitoring showed that the alternative fill performed very well, with no signs of structural settlement, frost heave or problems caused by rising groundwater. Detailed technical studies of the project were later published by the National Cooperative Highway Research Program in NCHRP Synthesis 199, titled Recycling and Use of Waste Materials and By-Products in Highway Construction. The Federal Highway Administration also included the project in its detailed user guidelines. The findings helped change how state transportation departments across North America viewed industrial byproducts. They showed that fine ash collected from coal-fired power plants could replace traditional soil and aggregate used as backfill.
Engineering a major highway embankment with industrial waste
The decision by Illinois transport authorities in the early 1970s to use fly ash on such a large scale addressed two major problems: the high cost of digging and transporting natural soil, and the growing amount of industrial waste produced by Midwestern power plants. Fly ash is the non-combustible mineral material left after pulverised coal is burned in power plant boilers. Its particles are very fine, light and mostly spherical. Engineers found that when properly compacted, fly ash could provide strong resistance to shearing while weighing less than common clay or sand fills. During construction near Waukegan in 1972, contractors placed and compacted the 246,000 cubic yards of fly ash in controlled layers to create the main core of the embankment beneath the 7,500-foot road section. To prevent erosion and stop wind from carrying away the material during construction, crews covered the fly ash core with a thick layer of natural soil along the side slopes and road base. Instruments were installed throughout the site to track how the artificial embankment responded to heavy traffic and the severe freeze-thaw cycles common in northern Illinois winters.
Technical evaluations confirm long-term structural stability
Monitoring over several years showed that the fly ash core performed as well as, or better than, traditional soil embankments. According to NCHRP Synthesis 199, published under the Transportation Research Board, inspections after construction found no detectable uneven settlement across the 7,500-foot section. The ash also had pozzolanic properties, meaning it could react with moisture and free lime over time to form cement-like bonds. This helped increase its strength as the embankment aged. Monitoring teams also found no signs of frost heave during severe winter freezes. They did not detect capillary water movement that could damage or weaken the asphalt pavement above. Research records kept by the Federal Highway Administration in document FHWA-RD-97-148 noted that the Waukegan project became an important model for state transportation departments in Delaware, Michigan, Minnesota, Pennsylvania and Wisconsin. These states later created formal standards for using fly ash in structural fills during the late 1970s and 1980s.
Environmental standards and legacy of ash recycling
Although the 1972 Illinois project showed that coal ash could work well as a construction material, later decades brought stricter rules for managing the environmental risks linked to combustion waste. Early projects mainly focused on structural performance, moisture and density, and shear strength. Modern highway construction guidelines from the Environmental Protection Agency and state environmental agencies require detailed groundwater studies, protective sealing layers and groundwater monitoring. These measures help prevent trace heavy metals in fly ash from entering nearby water sources. Despite stronger environmental controls, the engineering principles proven on the 7,500-foot road section near Waukegan remain relevant to infrastructure projects around the world. The successful 1972 project showed that industrial combustion waste, when properly engineered and protected, could provide a strong and long-lasting alternative to natural aggregates in major transport corridors.
